MT Box  ( BB5 / BB5+ unlock Activated ) without cables

LATEST UPDATES:  Please check on official support area .

FREE Unlock 2610, 2310, 1112, 1110i and corresponding American models

Since other flashers started releasing patch solutions for unlocking DCT4 and BB5:
Under 'Lock SIM' button, we've added new button 'PatchSIM'.
Use it to unlock DCT4 phones, using the RSA protection.

How to:
1.Select MCU file to be the same as the file flashed to phone.

2.Press 'Patch SIM' – it will locate where to patch, and generate patch.

Then MT will flash the patch file. Send Unlock command. Flash original file, so phone is restored to normal.

Supported models: - all that we have tested on – 2610, 2310, 1112, 1110i and corresponding American models.

P.S. We don't like destroying good business by releasing free solutions, but since others decided to do it, we have to release it. We've tried to make it as easy as possible to use.

Enjoy GT

Example log from successful unlocking (example phone is 2610):

Boot...
ASIC ID: 3040
DCT4
u3_2nd.fia
u3_amd.fia
84407A79D1C3D268E3E19D07C052

Configuration Info (9F):
Number of Flashes: 2
01000000: Samsung, 00EC 22E8 0000 7121, 10
02000000: NotUsed, 0000 0001 0000 0000, 0
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Erase[0.06 MB]...
erasing region [010B0000 to 010BFFFF]
in 0.44s

Flash[0.06 MB]...in 0.33s

* * Processed file in 9.11 seconds
Sending Unlock command ...Phone is in: Local mode
Imei: 3597710

=========== PATCH UNLOCK - OK ===========

Restoring original flash!!!
Boot...
ASIC ID: 3040
DCT4
u3_2nd.fia
u3_amd.fia
84407A79D1C3D268E3E19D07C052

Configuration Info (9F):

Number of Flashes: 2
01000000: Samsung, 00EC 22E8 0000 7121, 10
02000000: NotUsed, 0000 0001 0000 0000, 0
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Erase[0.06 MB]...
erasing region [010B0000 to 010BFFFF]
in 0.44s
Flash[0.06 MB]...in 0.33s

* * Processed file in 9.13 seconds

MTB NK 1.28 SX4 Server emulation
Monday, 15 January 2007

Release notes:
Bugfixes:
BB5 RPL Write – added 20seconds delay between certificate write, and serial sending of simlock and SuperDongle data. NOTE – in order for simlock sending to succeed, phone should power on in LocalMode. If it doesn't correct your cable.
In case that phone has some problem with powering on in LocalMode, connect phone, manually power it on in LocalMode, and then choose write RPL Again, MT will detect that Phone has valid Imei, and offer choice to skip certificate sending and do the serial sending only.

New features:
- BB5 ASKs created with MTBox can be computed through GTServer. For more information see the release notes of GTSAccess 1.34 .
- Added SX4 Authorization for PMM write on BB5 phones. BB5 phones have protection for writing RF(1 ) and Energy(309, 0x135 in hex) settings in eeprom. NOT HAVING THOSE SETTINGS IN PHONE, IS KNOWN AS 'CONTACT RETAILER PROBLEM', OR 'SECURITY ERROR' IN SELF TEST. In order to write those settings phone requires an authorization that only SX4 smart card can perform. As those cards are hard to get, we've added server support for this authorization. To authorize, connect BB5 phone, and power it on. Press SX4 button ( located in Eeprom control page). If you have SX4 card connected to PC, MT will use it to compute the authorization password and send it to phone. If you don't have card, MT will connect to server to compute authorization password. In order to connect to server, you must have 'saved' valid account information for GT Server, and the account must have at least 1 credit left. The computation is FREE, your account will not be charged. Because the authorization procedure must complete in very short time, if you have bad internet connection, you may have to try a few times, before it is successful. Onece you've authorized phone, you may write PM settings to phone. If phone is restarted, you need to authorize again.

To restore PM of phone, after eeprom is eerased:
1.Connect phone.
2.Make sure it has serial communication ( recommend to see it responds to phone info in local mode).
3.Load the PM file ( load file, in Eeprom controls page).
4.Mark Section( resource) 308 (0x134) and press Write Selected.
5.Restart phone. Either disconnect and reconnect phone to MT, or change mode to Test.
6.Press SX4 button, and wait for it to display that authorization was successful.
7.Press Write All button.

If no error are report, then you've successful restored the PM of the phone.

With the support for PM authorization we've ensured that our clients are able to actually service BB5 phones. Now you can make complete backup of IMEI and EEProm, change flash and restore IMEI and Eeprom with no additional charge for you.
WARNING: many of you will try to downgrade phones, by erasing the Eeprom and then restoring after phone is flashed with lower version. There is significant risk, that phone will not accept simlock data ( 308, in hex 0x134) from higher version. So you still risk to end with damaged phone. That is why we recommend to avoid downgrading. If this happens you have two options: restore phone back to high version, and then write PM, or compute RPL and write RPL to phone. So if you really need to downgrade some BB5, you may have to compute RPL for it!

For those who wish to make full erase of BB5 phones, we've created 4 files. BB5Erase_8MBrap.bin – fully erase first 8MB of RAP3 flash.
BB5Erase_16MBrap.bin - fully erase first 16MB of RAP3 flash.
BB5Erase_EE_8MBrap.bin – erase only eeprom located at the end of 8th MB
BB5Erase_EE_16MBrap.bin – erase only eeprom located at the end of first 16th MB.

!!!! VERY IMPORTANT !!!!

ALL WE KNOW FOR PROBLEMS WHIT BAD QUALITY SERVICE CABLES.

ON THIS CASE IS CRITICAL PHONE TO BE IN LOCAL OR TEST MODE after RESTART from certificate write.

so please check this link:

http://forum.gsmhosting.com/vbb/show...58&postcount=6 Problem is also 10 to 8 pin adapter cable connectors have very poor contact of GND and this come a big problem. (we already start producing new type adapter cable)

Some times is need to push hard RG45 to adapter to be able to have any communication.

So if you not see this:
Simlock send - SUCCESSFULL!!!
SuperDongle send - SUCCESSFULL!!!

Simple check YOUR cable connection befor make any posting on forums.

MTBox Nokia 1.26 beta_Merry Christmas release.
Saturday, 23 December 2006

NOTE: Before install this version kindly uninstall old version then only install with this version.

BugFixes: 6630 flashing ( imei 12345....) after flash – fixed.

Includes: latest flash loaders from Nokia V. 6.44.047.

New banner – linking to good user manual for MTBox.

New Features:
In effort to provide better service for BB5 phones, we've implemented Backup/Restore for Imei certificates of BB5 phones.

Added 4 button in 'IMEI/ESN Repair' page: Read Ask BB5 – use this to read ask for IMEI calculation for BB5 phone (gt format.... more info on this next year).

Write RPL BB5 – to write Nokia RPL file for BB5 phone ( IMEI, SIMLOCK and SUPERDONGLEDATA).

Read IMEI Backup – make a backup of the IMEI data of a BB5 phone (*.r3c files).

Write IMEI Backup – to restore a previously backed up IMEI (*.r3c) of BB5 phone.

In addition, there is option in 'Automatic Actions', so MT automatically makes IMEI backup of BB5 phones, while you flash them.... This means if you flash a phone... you will be able to fully support it in future.

Read ask and Write RPL are intended to be used to repair BB5 phones that for some reason destroyed IMEI or SIMLOCK data, or you needed to replace the flash IC.

ReadBackup/WriteBackup – if the phone is working and have correct data, you can make backup and then restore it without the need to compute RPL.

Important: In order to make this complete SuperDongle authorization must be implemented so you can also write RF and Energy data to phone. This is to be released somewhen in January.... We 've spend our time in an effort to release a version, hopping that it will bring you actual help and goods.

MT-box NK updates history
Thursday, 14 December 2006

-MTB_NK_v1.25.8.exe
-Unlock speed improved
-Some Bugs Fixed

01 12 2006
MT Box Nokia - MTB NK v1.25.6

Added server CACHE. If unlock of DCT4_PLUS fails, retry to unlock on same phone will use computed data instead of connecting to server.

01 12 2006
MT Box Nokia - MTB NK v1.25.5

Asic 11 and DCT4 plus unlock bug fixed

Phone is in: Test mode
Imei: 010997004532797
Info OK
USING ALREADY COMPUTED DATA
V 5.03/04-21-06/RH-92 (c) NMP
IMEI: 010997004532797
Operator: 0010100000000000
Profile bits: 0000000000010002
Sim Status: Not locked
FINISHED OK

30 11 2006
MT Box Nokia - MTB NK v1.25.3

- 6288 usb flashing added

NOTE:Nokia_Connectivity_Cable_Driver_rel_6_82_4_en g.msi
Please download the driver at support also the exe and torrent

27 11 2006
MT Box Nokia - MTB NK v1.25.3

• Added option to enter Login details without edit Griffin.ini file
• Added option to Save account login details
• Added option to Delete account login details

27 11 2006
MT Box Nokia - MTB NK v1.25.3

• Added option to enter Login details without edit Griffin.ini file
• Added option to Save account login details
• Added option to Delete account login details

15 11 2006
Asic 11 and DCT4 plus realised for MT box Nokia under GT Server

Supported Models:

• Nokia 1112
• Nokia 2310
• Nokia 2610

To use it you need to have Griffin server account.
For all who have it already need to edit Griffin.ini
Griffin.ini you can find in c:Program FilesGriffinTeamMT-Box
Open Griffin.ini in any text editor and enter your Griffin server login details
Add these two lines to Griffin.ini

s_user=Griffin_server_user_name
s_pass=Griffin_server_password

After edit the Griffin.ini look for example:

[interface_options]
s_user=Griffin_server_user_name
s_pass=Griffin_server_password
extras=1
extras_index=4
RPL_208=0
LogToFile=1
FlsaDisplayDetail=0
ProductProfile=0
GprsSettings=0
NvdAccess=0
AutoUnlock=0
UpdateProductCode=0
ResetUserCode=0
NvdNvd=0
SkipBluetooth=0
FactoryDefaultSettings=1

Save edited ini file, and start MTB_NK_DCT4PLUS_ASIC11.exe
Connect phone using FBUS cable and press unlock
Internet connection required
Please allows connection if any firewall
This is real time unlock and operation take only few seconds
The phone will be unlocked like from factory

This operation wil take only 1 credit from your Griffin server account.

15 11 2006
MT Box Nokia release v1.25

Improvements:

• Improved support for USB flashing of BB5 phones.Added USB flashing for RAP+APE based phones. This version should support USB flashing for all BB5 phones.
• Support for retry flash over USB. In case that something goes wrong and phone is accidentally disconnected from PC while flashing: without removing phone battery connect to PC, restart MTB_NK, choose manually phone model, click USB mode and flash. Application should successfully flash phone.

Support for automatic backup of simlock field, and RF settings, when flashing BB5 phones. MTB_NK will automatically make PM file before flashing phone. Bugfixes:
* DCT3 flashing.
* PM Reading ( application stuck when a field is forbidden for reading).

28 April 2006
MT Box Nokia release v1.20

Release notes:

• Support for latest fia ( v. 6.11.007 )
• Support for 128K page size on BB5 phones ( gallery problem 6280 ) (n1)
• File distribution over torrent protocol. (n2)
• Notification for new files available on torrent server.
• Free text search in Products list .(n3)
• Operation indication in Caption bar
• Autopower BB5 phones when connected to box. (n4)

Bug fixes:

• Ask read for Asic 7 dct4 phones. Note that for this type IMEI is not read from UEM so you have to enter IMEI value manually.

Notes:

(n1) For BB5 PageSize for content is retrieved in FBUS mode... so if flashing only content, make sure phone is powered ON before you press flash.

(n2) To automatically LogIn the torrent server, double click on one of the files listed in 'Online news update'. Box will open Web Browser and authorize automatically. No need to enter user name and pass.

(n3) Because products list is very long and it is hard to search, we've added Text search option. Type in the text that is contained in product description and press enter.
For example if you want to select product code '0522840 - QB EURO-K DARK BROWN RUSSIA' you can type 0500840 and press Enter. Or type 'russia' and press enter.

(n4) To be able to use auto power in LOCAL MODE BB5 phones BSI resistor must be changed. Change resistor from 3.3K to 5.1K.With old cables which have 3.3K phone will power in Normal mode.

Download:
mtb_nk_setup120.exe

2006-04-12
MTB_NK release 1.19

New Features: Warranty Information edit. We have added new panel to the EXTRAS list. It will let you edit the warranty information of Nokia phones.

Added version information for new BB5 phones.

The version is shown before ProductCode in Pcode combo box. This is releated to 6270, 6280, 7370.... and similar models
Bugfixes:
Increased wait time for full factory set , so old WD2 phones succeed in After flash Procedures.
Fixed phone flashing for 3250.

NOTE:
- there is some problem with FlashLoadesr 6.05.003, so don't use those, use the ones provided with version 1.18 ( 5.51.007). for 3250 flashing, it is strongly recommened to use VPP ( will improve flashing time with 4 minutes and 30 secondes). Note that some of the cables on the marked could have VPP , so take care to correct it before you use it. See 3250 pinout for more details.

3250 has ContentFlash, but the content doesn't need to be extracted, so we have addeed another 'Automatic Action while flashing.' it is ¡°Skip CP Extract¡±. Check it when flashing 3250 in order to save time.

2006-04-02
New Updates For MT-Box NK

• 1600 unlock bug fixed
• CP extract on some models bug fixed

You can download it at support area.

2006-03-05
MT Box update tool v3.4

Whats new?

This tool with just one click make your MT Box updated to latest version.
This tool also will be used for MT Box plug-in online activation.
First plug-in will be for Alcatel service software.
Alcatel activation will be very simple with also acceptable price.
All details about new MT box plug-ins will be available soon.

Stay tuned with latest updates!

Download:
MT Box update tool v3.4

2006-03-01
Griffin Team Virtual COM for MT Box v1.1

New features:

- VBAT settings
- VPP settings
- Save power scheme
- Load power scheme

Download:
Griffin Team virtual com for MT Box v1.1

2006-02-28
MTB_NK_v1.17

Download From Support Section:

Phoenix_service_sw_2005_44_7_123.exe
Wintesla This Phoenix will works on your MT-Box like PKD-1 simulator
With This new Updates of MT-Box Nokia You can Works with Phoenix and Wintesla
First at all Download the Phoenix latest version and Wintesla
For those who already install phoenix you can run the Phoenix with your MT-box.

Download 3 Files from support area

1.MTB_NK_v1.17 <--added PKD1 Emulator
2.FLS-4Drv-Jun10-141542.exe
3.How to install and use MT Box Nokia as PKD1 dongle.pdf

First Update your box by using MTB_NK Update Tool v3

How to update & install kindly read the manual

20-02-06
Griffin Team Virtual COM for MT Box

What this mean?
This mean you can flash almost all phones (no need to be supported by MT box) using your MT box on unbeliveable speed.
Griffin Team Virtual COM for MT box has possibility to flash phones at the 1.8 Mbps (2 times faster then 921600)
For example you can flash all new Siemens phones using WINSWUP at 921600 without any special cable.

Why not to flash 8 Siemens phones for same time you need to flash only 1 phone using simple com cable?
There is possibility to use 10 and more Virtual com ports on the only one PC.
This mean you can flash 10 and more phones in same time with only 10% PC usage.

Download:
Griffin Team Virtual COM

Tested on:
- Siemens (Winswup)
- Samsung (Optiflash)
- Motorola (DM Tool)

11-02-06
MTB Samsung Beta version
Free Samsung software for all MT Box users (MT Box Nokia and MT Box SE)

You can use this software as is, WITHOUT ANY WARRANTY AND SUPPORT (its free of charge)

Software work with UFS Samsung cables plugged into the 8 -> 10 adapter (provided with your MT box)

Download:
MTB Samsung Beta

27-01-06
MTB_NK_v1.163 setup installer
New in 1.16 Version:
1. Patch files for some DCT4 phones added.

2. New instalation dir:
Separate flashdirs and productsdir in Griffin.ini
For Example:
products_folder=C:Program filesNokiaPhoenixProducts
flashldr_folder=C:Program filesGriffinTeamMT-BoxFlashLoadersFlash
flash3ldr_folder=C:Program filesGriffinTeamMT-BoxFlashLoadersFlash3
flashusb_folder=C:Program filesGriffinTeamMT-BoxFlashLoadersFlashUSB

3. Added PMFiles for some phones (not tested just collected)

4. Bug fixed for Nokia 3300 - ADSP flashing.

5. New Flash Loaders - version 5.51.007

6.Manual How to works imei patch (Download it at Support Area)

28-12-05
MTB_NK_v1.15 setup installer
Newbies:
1. If clicked on GRIFFINTEAM banner should open www.griffinteam.net

2. If clicked on MT-BOX banner should open www.mt-box.org, and read pin status

3. If you press ENTER while in EXE should search for the Nokia model entered in MODELS COMBO
Explanation: untill now to search for example for 1100 you had to:
click on model, type 1100 and press UP or DOWN arrow now you can press UP, DOWN or ENTER and exe will search for 1100 ( many users try to search by pressing ENTER)

4. Added fixed folder for AUTOSAVED RPLs from field 208.

5. Now if users manually browsed for files for some model, MTB_NK will remember the selected files, instead of Product code. Next time this model is selected, MTB_NK will automatically load either previous Product code, or Last FILES that were manually selected. NOTE: WE STRONGLY RECOMMEND TO FLASH PHONES BY SELECTING ProductCode. By doing this you will also select proper files for tunning the phone after flashing it.

6. Support for lattest FIA package ( 3.35), not compatible with previouse packages, so it should be used with 3.35 or later.

7. 6270 Flashing support

15-12-05
MTB_NK ver 1.13 released.
Bugfix:

• Content flashing for 128K page size
• Error processing for DCT3 phones

Added:
Boot information for BB5 phones( toolbar/status button, next to RST button)

12-11-05
MTB_nk version 1.11 release.
BugFixes:

• Dct3 flashing.
• Dct3flashing Eerpom only.
• Reset of phone afetr setting full factory set.
  Note: if FAID communication fails, you can uncheck the flash files, and press flash again ( with phone ON), MTB_Nk will execute only post flash serial communication (including FAID).
• DCT4: automatic select of content file for RH-59. Tip for reparing RH-59, that doesn't power. Do a full erase (01000000-01ffffff) , and then flash phone. If it was SW problem, this will repair it.
  Improvements: some improvements on serial communication, so now communication should be faster.

New features in this version:

• Net Monitor activation, deactivation for DCT4 and TIKU phones. You need to flash phone in order to do that.
  NOTE: BEFORE USING THIS VERSION, PLEASE USE "MT Toool.exe" TO UPDATE YOUR BOX. Latest version of MT Tool.exe is published along with Mtb_nk version 1.11.
• Skip Erase: flash phone, but skip erase procedures. This is usefull for repairing phones with damaged flash chips.
• ResetUserCode button: in expanded view of application. Use this to reset user code to 12345. Note on some phones, this is not possible, use Full Factory Set on those models.
• Sim Lock State: button to allow you read the simlock state of connected phone. Application will ask phone and display detailed information of to what operator and with what options the phone is locked.
• Lock SIM: allows you to browse for SIM file, and use it to lock phone. This is the most correct way tolock a phone. Operators will use the same SIM files to lock phones. Note: if in the product folder there is no SIM file for the operator you want, use can modify othe SIM file. The format of the SIM files is simple and fairly easy to understand.

21-10-05
MTB_nk version 1.07 release.

• MTB_nk version 1.07 release notes.
• 1100,2300 bugfix to erase correctly phone.
• FIA loader, search bugfix.
• Interface changes:
  - Show erase progress where available.
  - For BB5 erase progress is not available so now shown.
  - We could show you some dummy progress bar, but this will not be correct.
  - DCT4 - progress is avaiable for majority of models.
  - WD2 - progress not available for most of models, because the new fast algorithms for erase have no progress indication. If you want to see progress, DisableVPP and enjoy slow erase with progress as with the other flashers on the market.
  - TIKU - for most models progress is avaible.
• Show Algorithm loaders that are sent to phone.
• Abort flashing procedure if some of the selected files can't be opened.

21-10-05
New Updates For MT-Box NK

Available at support area in MT-Box Nokia

• 1600 unlock bug fixed
• CP extract on some models bug fixed

========================================================================================

The New Sleek Designed MT Box will change the way you repair your phones by allowing faster Flashing, Repairing and Unlocking time. And as your personal, portable phone service device, MT Box looks good but works good aswell.

Its compact and portable design, makes it easy to take it along anywhere with you. MT Box which is powered by Griffin Team, supports the newest Nokia in the market.

NOTE:Flashing 10 Different Phone in same time
With MT-Box you can Flash 10 phone or different models at same time just you need to have 10 MT-Box.Example:You can connect 5 MT-SE and 5 MT-NK or any MT-Box connected to your pc up to 10 box only

IMPORTANT:
If you have purchase the MT-Box for example Blue colour which is for Nokia you can run the SE software for trail version 10 times after that your box will be no more connected with the SE software only for Nokia will connected. This is same with the MT-Box Green colour which allow you to run Nokia software for 10 times and after that it will no more detected for nokia and it only will connect SE.

Features:

• MT Box are electronically tested before being assembled
• Compatible with Win XP and Window 2000.
• Support Future Updates
• Compatible with Laptops or Desktop with atleast a USB Port available.
• Faster Flashing times and more reliable.
• Flashing BB5 Phones (6630, 6680, 6681)
• BB5 Phone Flashing 2.27min
• Direct Unlock for all DCT3, DCTL, DCT4 and WD2 phones
• Turbo Flashing for DCT3 and DCTL phones
• Faster Flashing on DCT4 and WD2 phones
• Able to backup or restore Phone book and ring tone
• Can do self test for DCT4 Mobiles
• Java midlets upload possible on supported phones
• Can Restore FULL FACTORY defaults and SECURITY CODE
• Can Repair 7650 problem "Phone Failed Contact Supplier"
• Can Repair "Java / Folders / Games" on 7210, 6100, 6610 3510i etc...
• Can Act as a Virtual COM port on WinXP
• With "Skip Bluetooth Flashing" Option

Supported models:
BB5: 6630, 6680, 6681

DCT3: 2100, 3110, 3210, 3310, 3315, 3330, 3350, 3410, 3610, 5110, 5130, 5190, 5210, 5510, 6080, 6090, 6110, 6130, 6138, 6190, 6210, 6250, 7110, 8210, 8250, 8850, 8855, 8890, 9110, 9110i

DCT4: 1100, 1110, 1600, 2300, 2600, 2650, 3100, 3108, 3120, 3200, 3220, 3300, 3510, 3530 (3510i), 5100, 5140, 6020, 6030, 6108, 6610,6610i, 6100, 6101, 6200, 6310, 6310i, 6500, 6510, 6800, 7210, 7250, 7250i, 8310, 8390, 8910, 8910i

TDMA: 1260, 1220, 1261, 3360, 3320, 3361, 3520, 3560

TIKU BT2: 6230, 6230i, 6650, 7260, 7270, 7280

WD2 (Symbian): 3650, 3660, 6600, 6620, 6670, 7610, 7650,N-Gage, N-Gage QD

New Supported models:
7710,9300,9500,N70,N90



Package Contains :
- 1 X MT Box (nokia) (BB5 / BB5+ Activated)
- without cables

• 

  MT Box Nokia BB5 cables set

  USD 35.00

  

Email this to a friend	* means required information
*Name of your friend
*E-mail of your friend
*Your Name
*Your Message	MT Box (BB5 / BB5+ Activated) without cables - MT Box is the new device for your Nokia mobile phone software requirements. Using the latest hardware, technology it has an extremely flexible nature and a very large capacity to undertake all you current and future requirements.